Our CL-S700II series is designed for ease of use; the metal mechanism opens vertically to a full 90° to allow for easy ribbon access, while integrated ribbon control and positioning support precision printing on even small or specialist media. The CL-S700II also comes in a direct thermal only model.
- Capacity for ribbons up to 450 meters
- Optional rewinder, peeler, cutter and 300 dpi
Benefits
- Paper width: Variable paper width - 1 inch (25.4 mm) – 4.6 inches (118.1 mm)
- Paper load: Front access for all operations including media and ribbon changing
- Printing Speed: Ultra fast print out - up to 250mm per second (10 inches per second)
- Media support: Very large media capacity - holds rolls up to 8 inches (200 mm)
- Ribbon options: Wide range of ribbon options - Uses up to 450 metres inside and outside wound ribbons
- Paper thickness: Paper thickness up to 0.250mm
- Display: Backlight LCD control panel for easy configuration
- Front Loading Rewinder for easy rewinding of the backing paper when printing in "peel mode" or when printing batches of labels.
- Hi-Open case for vertical opening, no increase in footprint and safe closing.
- No more unreadable labels - the ARCP™ ribbon control technology assures clear prints.
- Low space requirement - integrated power supply enables clean work station
- Power switch located in recess at front of printer
- Energy: Internal power supply for reliability
Media sensor:
- Adjustable media sensor
- Black mark sensor
- Label gap sensor
Tear bar: Standard tear-bar for perforated tags
Specification
- Printing Technology: Thermal Transfer + Direct Thermal
- Resolution: 203 dpi
- Print Speed (Maximum): 10 inches per second (254 mm/s)
- Print Width (Maximum): 4 inches (104 mm)
- Media Width (Min to Max): 1 - 4.6 inches (25 - 118 mm)
- Media Thickness (Min to Max): 63.5 to 254 µm
- Media Length (Min to Max): 0.25 to 99.99 inches (6.35 to 2539.74 mm)
- Roll Size (Max) / Core Size: Outside diameter 8 inches (200 mm) / Core size 1 inch (25 mm) / Plus outside media slot
- Ribbon Size: 3.4 inches (86.5 mm) maximum outside diameter / 450 metres length
- Ribbon Winding & Type: Ink side in or out, automatically sensing / Wax, Wax/Resin, or Resin Type
- Ribbon System: ARCP™ automatic ribbon tension adjustment
- Mechanism: Hi-Lift™ metal mechanism with wide opening head
- Media Sensor: Fully adjustable rear sensor and high-resolution front sensor
Main Interface
- Triple Interface: USB, Parallel, and Serial built-in
- Exchangeable interface card slot for optional card
Optional Interfaces
- Wireless LAN: 802.11b and 802.11g standards, 100 metres, 64/128 bit WEP, WPA, up to 54 Mbps
- Ethernet: 10/100 BaseT
- Case: Hi-Open™ metal case with a safe, soft-close feature
- Control Panel: 4 buttons / 4-line back-lit graphic LCD
- Flash (Non-Volatile Memory): 16 MB total / 4 MB available for user
- RAM (Standard Memory): 64 MB total / 30 MB available for user
Emulations (Languages)
- Datamax® DMX
- Cross-Emulation™ - autoswitch between Zebra® and Datamax® emulations
- Zebra® ZPL2®
- CBI™ BASIC Interpreter
- Eltron® EPL2®
- Size (W x D x H) and Weight: 255 x 490 x 265 mm / 13.3 Kg
